Chinese memory manufacturer Netac Technology achieves memory speeds of up to 8000 MT/s with a low CAS latency of 38 clock cycles with its Z-RGB and DDR5 memory series RAM kits. SK Hynix’s memory chips, which are designed for high clock frequencies, are responsible for the high transfer rates.
A SK Hynix dies allow up to 8000 MT/s
Based on South Korean semiconductor manufacturer SK Hynix’s A-Die memory chips, which are known for their high memory clocks, Chinese RAM manufacturer Netac Technology has released a total of six new memory kits with DDR5- 6000, -6200, -6600, -7200, -7600 and -8000 introduced.
The six RAM kits are offered with a total capacity of 16 GB (2 × 8 GB), 32 GB (2 × 16 GB), and in the following configurations:
- DDR5-6000 CL36-36-36-96 at 1.35 volts
- DDR5-6200 CL32-38-38-96 at 1.35 volts
- DDR5-6600 CL34-40-40-105 at 1.4 volts
- DDR5-7200 CL34-45-45-115 at 1.4 volts
- DDR5-7600 CL36-46-46-122 at 1.4 volts
- DDR5-8000 CL38-48-48-128 at 1.5 volts
The (A)RGB lighting on the crown of the heat conducting plates (heat diffuser) should not be missing from the Z-RGB series either. It should be able to be configured with any known RGB software as well as all manufacturers’ motherboards. Memory modules are offered in glossy and matte finishes.
the chinese site IT Homewhich was the first to report the new memory kits, also introduced more entry-level RAM kits with DDR5-4800 CL40 at 1.1 volts, DDR5-5600 CL40 at 1.2 volts and DDR5-6000 at 1, 35 volt Outlook.
Regarding possible prices and availability, no information is known.
Introvert. Beer guru. Communicator. Travel fanatic. Web advocate. Certified alcohol geek. Tv buff. Subtly charming internet aficionado.
