FRITZ!OS 7.39-101161 Lab for FRITZ!Repeater 6000 offered – it-blogger.internet

The manufacturer of the FRITZ!Box AVM currently launched a new lab firmware for FRITZ!OS 7.39-101161 for the FRITZ!Repeater 6000 produced. The update only incorporates bug fixes and other improvements for the FRITZ!Repeater 6000, which can be viewed below. The update to FRITZ!OS 7.39-101161 for the FRITZ!Repeater 6000 now you can down load and check out. As a user of the lab variation, you can down load the update by means of the FRITZ!Box user interface. More info on this update can be identified down below or on AVM.

Download -> Download FRITZ!OS 7.39-101161 for FRITZ!Repeater 6000

The new firmware is out there for obtain at the adhering to AVM internet site:

• Down load FRITZ!OS 7.39-101161 for FRITZ!Repeater 6000
  Attention: This firmware is only appropriate for FRITZ!Repeater 6000!
  Site -> https://avm.de/fritz-labor/

New advancements in FRITZ!OS 7.39-101161 for the FRITZ!Repeater 6000

• Improve: The thrust assistance for visitor WLAN accessibility sends login/logout situations of guest devices from the respective mesh master or mesh repeater they are registered to.
• Improvement: In addition to nation and language, the time zone is now also applied to a repeater in the mesh (FRITZ!Repeater or FRITZ!Box as mesh repeater).
• Mounted: Corrected labels on the abscissa axis on the “WLAN / radio channel” webpage if the “1 minute” time interval was chosen.
• Fixed: “Refresh” button was lacking on “WLAN/wireless network” web page when MAC filter was energetic.
• Fastened: Many optical fixes on the “WLAN / Radio Channel” web site with WLAN radios disabled.
• Preset: In environments with really couple WiFi networks, the vehicle channel aspect could have an unfavorable channel rating.
• Fixed: Fixes in “WLAN/Safety” web site when adding new WLAN products to MAC filter.
• Fixed: Missing LED signage for WPS failed method.
• Set: Following modifying the home community to a distinctive IP address, some aged IP addresses have been even now displayed, even while DHCP had already assigned new kinds.
• Mounted: If the FRITZ!Repeater was not related, “The weather conditions server is not responding” appeared much too often in the function log.

Notes on the lab update for the FRITZ!Box

This FRITZ! The lab edition has beta position. It was tested in typical environments right before launch, but it can also lead to malfunctions. AVM assumes no accountability for any problems ensuing from the use of this model. You can improve the FRITZ!Box back to the formal FRITZ!OS utilizing the recovery.exe file incorporated in this lab package deal.

related posts

Notice: To use the new capabilities, use a world-wide-web browser that supports HTML5, for case in point, the recent versions of Chrome, Edge, or Firefox.