The maker of the FRITZ!Box AVM nowadays unveiled a new lab firmware for FRITZ!OS 7.39-99879 for the FRITZ!Repeater 3000. This update fixes bugs located in previous versions, so you should not expect new capabilities. Among the other matters, bugs have been set that prompted the LED signaling to be missing when activating Mesh or when setting up WPS by way of the user interface. The update to FRITZ!OS 7.39-99879 for the FRITZ!Repeater 3000 can now be downloaded and tested. Users of the lab model can obtain the update via the FRITZ!Box consumer interface. Any individual who has currently installed a lab edition on their FRITZ!Box will mechanically be provided the update and can set up it instantly by way of the consumer interface. Far more data on this update can be found below or on AVM.
Download -> Down load FRITZ!OS 7.39-99879 for FRITZ!Repeater 3000
The new firmware is readily available for obtain at the subsequent AVM internet site:
- Down load FRITZ!OS 7.39-99879 for FRITZ!Repeater 3000
Focus: This firmware is only acceptable for FRITZ!Repeater 3000!
Website -> https://avm.de/fritz-labor/
New advancements in FRITZ!OS 7.39-99879 for the FRITZ!Repeater 3000
- Preset: LED signaling was lacking when activating the mesh in selected conditions.
- Fixed: LED signage was lacking when beginning WPS from the UI.
- Enhancement: Stability.
Notes on the lab update for the FRITZ!Box
This FRITZ! The lab edition has beta position. It was examined in standard environments just before launch, but it can also cause malfunctions. AVM assumes no responsibility for any injury resulting from the use of this edition. You can improve the FRITZ!Box again to the formal FRITZ!OS making use of the restoration.exe file provided in this lab deal.
related posts
Notice: To use the new attributes, use a world wide web browser that supports HTML5, for example, the latest versions of Chrome, Edge, or Firefox.